Ranger DST-2420

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$1,720.00

Description

The Ranger DST-2420 wheel balancer is a highly accurate and dependable no frills balancer that features our proprietary Digital Sensor Technology for critical reliability and repeatability. From one bay shops to high volume tire stores, the DST-2420 is built with a gritty toughness that puts out perfectly balanced wheels day after day, around the clock. Like all of our DST Series wheel balancers, it's a zero tolerance performer that features our proven Direct Axis drive system, accurate to within hundredths of an ounce ensuring wheels are balanced vibration free.

The DST-2420 automatically calculates the exact weight needed to achieve an optimal balance for almost every tire and wheel configuration on the planet and brightly displayed LED mark the exact amount and location in just six seconds. A full menu of time saving features that includes Dynamic, Static, and Performance Alloy settings allow you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

Digital Sensor Technology
Our highly accurate Digital Sensor Technology features a 16-digit digital signal processor and single-chip technology that increases productivity and offers unprecedented speed and accuracy--especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.

Single-chip circuit board architecture provides an inherent performance and reliability advantage compared to multi-chip implementations of the same functionality. In addition to overall latency reductions, the single-chip architecture significantly boosts device throughput. An extremely fast dedicated hyper transport protocol allows data to communicate with the micro-processor at much faster speeds. This solution offers unmatched integration of features and functionality and results in lower power consumption and dissipated heat.

Multi-Directional Quartz Piezoelectric Load Sensors
The DST2420 uses highly precise dual-component piezoelectric quartz load sensors combined with a single digital rotation encoder that measure both longitudinal, transversal, and shear effects for multi-directional force unbalance detection. The piezoelectric force sensors used on the DST2420 are very sensitive and offer long-term stability and freedom from fatigue for a service life that is virtually unlimited. The high rigidity quartz crystal sensors result in very high frequency detection in all three directions of measurement.

Digital Sensor Technology
Our highly accurate Digital Sensor Technology features a 16digit digital signal processor and singlechip technology that increases productivity and offers unprecedented speed and accuracy especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.
MultiDirectional Quartz Piezoelectric Load Sensors
The DST2420 uses highly precise dualcomponent piezoelectric quartz load sensors combined with a single digital rotation encoder that measure both longitudinal, transversal, and shear effects for multidirectional force unbalance detection.

Quick and Precise SetUp
Multisize center cones and a full rubber perimeter nomar gQuickNuth bell adapter makes mounting wheels fast and easy and minimizes the risk of costly wheel damage.

Mounting Cone Package

The DST2420 tooling package not only includes our standard car and light truck cones, but a heavyduty truck cone and spacer ring as well. This well equipped package includes three automotive and light truck cones; 1.75h 2.75h, 2.75h 3.50h, and 3.50h 4.25h, and one truck cone 4.50h 5.00h.

Weight Optimization

The DST242000 automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line.

Wheel Graphic Interface

A touchpad display panel features tire and wheel assembly graphics to help simplify speed entry of wheel data and helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easytoread icons helping operators identify and command all balancing functions.

LED Rolling Wheel Weight Displays

Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact topdeadcenter. Tiered weight placement indicators help identify outofsight weight placement such as splitweight or hidden gbehindthespokeh techniques. Aids with clipon, and tape weight placement at precise locations for zeroon balancing every time.

  • Motor: 1.5 hp / 110V/220V 50/60HZ 1Ph..
  • Working temperature: -5C/27F - 50C/82F
  • Drive system: belt drive
  • Cycle time: 6 - 9 seconds (avg.)
  • Balancing modes: dynamic / static / 3-alloy
  • Top positioning weight locator: standard
  • Inside & outside measuring: standard
  • Millimeter / inches selection: standard
  • Ounce / gram selection: standard
  • Wheel offset distance setting: manual
  • Self-calibration function: standard
  • Auto start when hood is lowered: standard
  • Wheel spin braking: automatic / electronic
  • Wheel holding manual brake pedal: standard
  • Centering cones included: 3 standard / 1 truck
  • Truck cone / spacer ring adapter set: included standard
  • Wheel calipers: standard
  • Rear cone mount spring: standard
  • No-mar rear cone mount pressure cup: standard
  • Quick-release & mount hub nut: standard
  • Maximum tire diameter: 47" / 1,194 mm
  • Max tire weight: 145 pounds (65 kg)
  • Max. wheel diameter: 10" - 24" / 254 mm - 610 mm
  • Wheel width capacity: 2" - 18" / 51 mm - 457 mm
  • Balancing increments: 0.25 or 0.01 oz
  • Balancing speed: 180 rpm
  • Accuracy: +/- 1 gram / .035 oz
  • Resolution (round off mode): 0.01 ounce, 1.4
  • Shipping weight: 398 lbs. / 181 kg

Installation & Operation Manual

View & Print PDF Catalog Sheet

Additional information

Brands

1 review for Ranger DST-2420

  1. Rated 5 out of 5

    best product

Add a review

Your email address will not be published. Required fields are marked *

You may also like…