BendPak XR-12000A

$13,245.00

Description

The Quatra Series Pantograph Lifts from BendPak - Raising the Bar
The distinctive Quatra series lifts by BendPak revolutionize the lifting industry by offering a 12,000-pound lifting capacity and a true vertical lift for a more compact footprint, better accommodating smaller service bays and work areas. Their unique quad-opposing pantograph scissors design eliminates restrictive arm structures found on other scissors car lift types that typically get in the way. Quatra lifts provide you with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work and work efficiently which increases productivity and most of all, your profits. No other scissors lift on the market offer the freedom that BendPak's Quatra series lifts provide.

The extended length Quatra XR-12000A was designed for vehicle alignments and general service work and accommodate a wide variety of wheelbases. Integrated recessed full-floating front radius plates and oversized rear slip-plates enable you to perform four-wheel alignments on a full spectrum of vehicles ranging from full-size work trucks to modern mini cars. The Quatra XR-12000A is also compatible with all leading alignment instrumentation, including new 3D systems and camera type wheel aligners.

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Integrated recessed full-floating front radius plates and over-sized rear slip-plates
  • Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
  • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps
  • Multi-position runway work steps
  • Non-skid runways provide sure grip for vehicles and technicians
  • Dependable electric/hydraulic power system
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls
  • Open front design with clear center, sides and rear
  • Multi-position automatic leveling system
  • Quad automatic safety locks with pneumatic push-button release
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
  • Lubricated-for-life bearings on all pivot points
  • Rugged steel legs and formed steel runways
  • Turned, ground, polished and hardened zinc plated axle pins
  • Grease nipples on all moving pins and bearings
  • High efficiency hydraulic power unit provides faster raising and descent times
  • Easy access to hydraulic/electrical components for simple routine servicing
  • Easy to use and understand operator controls
  • Power unit console with easy access front panel
  • Can be flush mounted or recessed
  • Lifting capacity: 12,000 lbs. / 5,443 kg
  • Overall width: 86" / 2,184 mm
  • Overall length / approach ramps extended: 296-1/2" / 7,531 mm
  • Overall length / approach ramps collapsed: 276-1/2" / 7,023 mm
  • Overall length / approach ramps stowed: 242-1/2" / 6,512 mm
  • Runway width: 24" / 610 mm
  • Width between runways: 37-1/2" / 952 mm
  • Length of runways: 219-1/2" / 5,575 mm
  • Min. 4-wheel alignment: 85" / 2,159 mm
  • Max. 4-wheel alignment: 160" / 4,064 mm
  • Max. 2-wheel alignment: 194" / 4,928 mm
  • General service wheelbase: 194" / 4,928 mm
  • Min. runway height: 11-1/4" / 286 mm
  • Max. rise: 68" / 1,727 mm
  • Max. lifting height: 74" / 1,880 mm
  • Min. wheelbase @ rated capacity: 155" / 3,937 mm
  • Min. wheelbase @ 75% capacity: 135" / 3,429 mm
  • Min. wheelbase @ 50% capacity: 110" / 2,794 mm
  • Min. wheelbase @ 25% capacity: 90" / 2,286 mm
  • Locking positions: 13" apart
  • Standard Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is
required for the safety-lock mechanisms to disengage. It is solely the
responsibility of the end-user to provide, install and maintain the air
supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via [email protected].

Product Not Found

BendPak XR-12000 Series Manual

View & Print Catalog PDF Sheet

Additional information

Brands

Reviews

There are no reviews yet.

Be the first to review “BendPak XR-12000A”

Your email address will not be published. Required fields are marked *