BendPak QUATRA XR-12000

$10,190.00

Description

The Quatra XR-12000 Pantograph Scissors Lift

The distinctive Quatra series scissors lift by BendPak revolutionizes the lifting industry by offering 12,000-pounds of uninhibited service capacity and true vertical lifting for a more compact footprint to better accommodate smaller service bays and work areas. The unique quad-opposing pantograph scissors design is void of restrictive arm structures usually associated with scissors lifts providing you with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work and work efficiently which increases productivity and most of all, your profits. No other scissors lifts on the market offer the freedom that BendPak's Quatra series lifts provide.

Make more money by going straight up.
Each BendPak Quatra series lift delivers straight-up vertical lifting unlike parallelogram style scissors lifts that ­­require more floor space due to their lateral lifting characteristics. Because there is no forward or rearward movement, the result is a more compact footprint to accommodate smaller service bays and work areas.

Compared to parallelogram and other traditional scissor lifts, the XR?12000 delivers:

  • Increased work space below the lift and around the runways
  • Unobstructed access points for easy entry and exit - front, rear  and both sides
  • Wide open walk through for unhindered service

Better by design
With an excellent combination of speed and ergonomic design, BendPak's Quatra series pantograph scissor lifts improve technician efficiency and productivity which helps you improve overall profitability. Featuring rapid rise and descent speeds, vehicles are positioned smoothly to any desired height with simple to operate controls. A sophisticated yet simple six-cylinder master-slave hydraulic circuit provides precise equalized lifting without the need for complicated electronics that often fail when subjected to high-use and soiled work environments.
The XR-12000 incorporates a full?menu of engineering and design enhancements that provide long term ruggedness and increased dependability. From the hydraulic cylinders and safety locking mechanisms, to fluid controls and pneumatics, all integral system components are enclosed within the runways to help protect them from harmful corrosives and operational damage. With few moving parts, and an uncomplicated fluid power system, BendPak's Quatra's offer the most economical and dependable method of lifting, delivering you many years of trouble free service.

 

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps
  • Multi-position runway work steps
  • Non-skid runways provide sure grip for vehicles and technicians
  • Dependable electric/hydraulic power system
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls
  • Open front design with clear center, sides and rear
  • Multi-position automatic leveling system
  • Quad automatic safety locks with pneumatic push-button release
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
  • Lubricated-for-life bearings on all pivot points
  • Rugged steel legs and formed steel runways
  • Turned, ground, polished and hardened zinc plated axle pins
  • Grease nipples on all moving pins and bearings
  • High efficiency hydraulic power unit provides faster raising and descent times
  • Easy access to hydraulic/electrical components for simple routine servicing
  • Easy to use and understand operator controls
  • Power unit console with easy access front panel
  • Can be flush mounted or recessed

Optional Equipment

  • Optional 6,000-pound capacity rolling jacks (model RJ-6) make a
    great addition to increase service capacity. Each jack has telescoping
    arms and frame contact pads that can be extended over the runways and
    positioned under vehicle lifting points. Each jack features three
    safety-lock positions and stackable truck and van adapters for increased
    lifting height and better access to frame contact points on high
    ground-clearance vehicles. The jacks come equipped with a commercial
    grade air-hydraulic pump requiring a maximum pressure of 125 PSI and
    10-20 CFM.
  • An integrated rolling bridge airline kit is available that
    installs neatly within the runway to create a more tidy hose routing
    solution for single or dual jack purpose.
  • The XR-12000A is equipped with an intelligent hydraulic
    regulating manifold featuring four, two-position ball valves to balance
    hydraulic pressure accurately between the master and slave cylinders for
    precise, equalized lifting of the runways. The manifold valve assembly
    is located at the power console with removable cover for simple routine
    maintenance and adjustment.
  • Lifting capacity: 12,000 lbs. / 5,443 kg
  • Overall width: 86" / 2,184 mm
  • Overall length / approach ramps extended: 269" / 6,831 mm
  • Overall length / approach ramps collapsed: 249" / 6,323 mm
  • Overall length / approach ramps stowed: 215" / 5,459 mm
  • Runway width: 24" / 610 mm
  • Width between runways: 40" / 1,028 mm
  • Length of runways: 192" / 4,875 mm
  • General service wheelbase: 199" / 5,055 mm
  • Min. runway height: 11-1/4" / 286 mm
  • Max. rise: 68" / 1,727 mm
  • Max. lifting height: 74" / 1,880 mm
  • Min. wheelbase @ rated capacity: 140" / 3,556mm
  • Min. wheelbase @ 75% capacity: 120" / 3,048 mm
  • Min. wheelbase @ 50% capacity: 100" / 2,540 mm
  • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
  • Locking positions: 13" apart
  • Standard Motor: 220 VAC / 60 Hz / 1 Ph
Product Not Found

Product Downloads

Additional information

Brands

Reviews

There are no reviews yet.

Be the first to review “BendPak QUATRA XR-12000”

Your email address will not be published. Required fields are marked *