BendPak XPR-10AS

$2,950.00

SKU: BEN5175770 Category: Tags: , , , , ,

Description

Our XPR-10AS asymmetric two-post lift offers the convenience of wide or narrow installation wrapped up into one configurable package. This durable, safe, and reliable car lift features an expandable top beam and Tru-Metric arms to suit virtually every vehicle lifting requirement. The simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity.

The XPR-10AS features double-telescoping screw pads with gouge and tear resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters are also included as standard accessories.

This true asymmetric lift features 30° rotated columns for added door-opening clearance and interior car access. The exclusive Tru-Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column).

This two-post model easily has the capacity to lift some of your largest full-sized pickups and commercial vehicles, yet still provide specific capability for sport and compact cars, both foreign and domestic—the XPR-10AS is a rugged, close-top model lift with a 10,000-lb. maximum capacity. And when it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legends.

All of BendPak's clearfloor asymmetric model lifts feature dual "direct-drive" low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system. This exclusive BendPak design feature saves you maintenance costs throughout the life of your lift—you aren't going to find friendly sensibility like this anywhere else. Some more BendPak XPR-Series exclusives include: 16 individual maintenance-free UHMW load bearings, single-piece columns, triple-telescoping arms, extra-tall lifting carriages and oversized 5" cable sheaves to vastly extend the life expectancy of moving suspension components. And, to better cater to your specific lifting needs, we offer similar model lifts with optional specialty arm configurations.

  • Lift arms shown with optional foot guards 10,000-lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Over-sized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set standard
  • Triple-telescoping arm design
  • Versatile drop-in contact pads with stackable adapters
  • Lifting capacity*: 10,000 lbs. / 4,536 kg

    • *Max capacity / front axle: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axle: 5,000 lbs. / 2,268 kg
  • Overall height: 145" / 3,683 mm
  • Overall width - NARROW CONFIG: 132" / 3,353 mm
  • Overall width - WIDE CONFIG: 145" / 3,683 mm
  • Width (outside of columns) - NARROW: 128" / 3,251 mm
  • Width (outside of columns) - WIDE: 135" / 3,429 mm
  • Floor to overhead switch*: 141" / 3,581 mm
  • Inside columns - NARROW: 99" / 2,515 mm
  • Inside columns - WIDE: 112" / 2,845 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 45-1/2" / 1,156 mm
  • Rear arm min reach: 42-1/2" / 1,079 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" / 1,854 mm
  • Lift height max (6" adapter): 79" / 2,007 mm
  • Drive-thru clearance - NARROW: 89" / 2,261 mm
  • Drive-thru clearance - WIDE: 102" / 2,591 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg
  • Shipping Dimensions: 150"x 24"x 28"

Product Downloads

Additional information

Weight5 lbs
Brands

Reviews

There are no reviews yet.

Be the first to review “BendPak Frame Cradle Pad... ”

Your email address will not be published. Required fields are marked *

You may also like…