BendPak XPR-10AS-LP

$2,985.00

SKU: BEN5175142 Category: Tags: , , ,

Description

Rugged Enough for Full-Size Trucks - Low-Enough for Sports Cars

Our XPR-10AS-LP asymmetric two-post lift features our exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. A telescoping overhead structure provides the convenience of wide or narrow installation wrapped up into one configurable package. This durable, safe and reliable car lift features Tru-Metric arms to suit virtually every vehicle lifting requirement. The powerful and secure XPR-10AS-LP is an incredibly rapid lift with a robust menu of features to increase efficiency and productivity. A simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. If you're looking to make more money in less time than ever before, you'll find that the new XPR-10AS-LP two-post lift is the perfect addition to your shop.

This true asymmetric lift features 30° rotated columns for added door-opening clearance and interior car access. The exclusive Tru-Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column).

 

  • Lift arms shown with optional foot guards
  • 10,000-lb lifting capacity
  • Telescoping Low-Pro arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece 63mm stackable adapter set comes standard
  • Versatile drop-in contact pads with stackable adapters
  • Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
  • Lifting capacity*: 10,000 lbs. / 4,536 kg
    • *Max capacity / front axle: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axle: 5,000 lbs. / 2,268 kg
  • Overall height: 145" / 3,683 mm
  • Overall width - NARROW CONFIG: 132" / 3,353 mm
  • Overall width - WIDE CONFIG: 145" / 3,683 mm
  • Width (outside of columns) - NARROW: 128" / 3,251 mm
  • Width (outside of columns) - WIDE: 141" / 3,581 mm
  • Floor to overhead switch*: 141" / 3,581 mm
  • Inside columns - NARROW: 104" / 2,515 mm
  • Inside columns - WIDE: 112" / 2,845 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 38-1/2" / 978 mm
  • Rear arm min reach: 34-1/2" / 876 mm
  • Rear arm max reach: 54-1/2" / 1,384 mm
  • Min pad height: 3-1/2" / 89 mm
  • Rise: 69" / 1,753 mm
  • Max. Lifting Height (pad only): 73" - 75" / 1,854 - 1,905 mm
  • Max. Lifting Height (3" adapter): 75.5" - 77.5" / 1,917 mm. - 1,968 mm
  • Drive-thru clearance - NARROW: 94" / 2,388 mm
  • Drive-thru clearance - WIDE: 102" / 2,591 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg

View and Print Catalog PDF Sheet

XPR-10A-LP Operations Manual

Additional information

Brands

Reviews

There are no reviews yet.

Be the first to review “BendPak XPR-10AS-LP”

Your email address will not be published. Required fields are marked *