BendPak PCL-18HD Portable Column Lift

$0.00

SKU: BENPC18HD Category: Tags: , ,

Description

The PCL-18 Series proudly adds to BendPak's distinctive history of building the best lifts money can buy with evolutionary steps in ergonomics, power, safety, durability and performance. These portable column lifts designed exclusively for heavy-duty fleet service are precisely suited for the toughest applications. Portable and surface mounted means no excavation or expensive site preparation.


The PCL-18 Series proudly adds to BendPak's distinctive history of building the best lifts money can buy with evolutionary steps in ergonomics, power, safety, durability and performance. These portable column lifts designed exclusively for heavy-duty fleet service are precisely suited for the toughest applications. Portable and surface mounted means no excavation or expensive site preparation. BendPak mobile column lifts provide the flexibility and convenience to lift vehicles ranging from light trucks to the largest two and three-axle vehicles up to 108,000 pounds with varied axle or wheelbase lengths. They provide more of what you need on every job; limitless lift cycles to keep you working longer, more flexibility to work on a wide variety of vehicles with easier, safer operation and more features and productivity-enhancing tools matched to your needs. The PCL-18 Series defines professional level performance and quality from the super-efficient three-phase power system to a simplistic yet durable design that helps reduce scheduled service requirements and operating costs. Never before has a series of portable column lifts delivered so much power and versatility for both indoor and outdoor* applications.

  • 18,000-lb. individual column capacity; 108,000-lb. maximum system capacity
  • Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger vehicles
  • 208-240 volt, 3-phase main power system - optional voltages available upon request
  • SINGLE, PAIR or TEAM operation
  • Simple operation, long service life and minimum maintenance
  • Intuitive controls allow the lift to be fully programmed and controlled from any column
  • Control systems feature 24-volt safety circuitry
  • The PLC and main system components are standard off-the-shelf
    brands rather than proprietary printed circuit boards or controls which
    can be very expensive to service or replace
  • Smart electronics feature self-diagnostics and self-calibration functions
  • Sealed and enclosed linear potentiometers feature precision
    potentiometric output and high frequency response for precise
    synchronization and communication of all columns throughout all
    operation cycles for precise, level lifting
  • Variable height limit settings can be programmed for shops with
    low ceilings or when specific vehicle service requirements necessitate
    specific rise heights
  • Two-speed lowering option turtle or rabbit speed settings
  • Each column is equipped with a warning light and audible alarm for critical warning alerts
  • Emergency shut off switches on each column quickly shut off
    power to the lift in the event an unsafe condition is detected by the
    operator
  • Separate key lock enclosure on each column
  • Electronics are multi-fuse protected
  • An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-sensitive areas
  • Pallet-jack style steering wheels enable the columns to be
    lowered firmly on the floor vs. constantly loaded spring-type steering
    wheels that can cause columns to roll when unladen with the weight of a
    vehicle
  • Low mounted power units and cylinders means a lower center of
    gravity making the columns easier to move and less likely to topple vs.
    screw-drive systems with heavy overhead motors and drive systems
  • Extended forks accommodate wide tires and deep wheel configurations
  • Multi-width wheel forks with locking pins accommodate the widest
    range of wheels eliminating the need for specialty wheel adapters
  • Tandem 8 diameter polyurethane covered steel wheels with sealed roller bearings easily roll over dirt and debris
  • Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
  • Manual safety override valves on each column permit the lift to
    be lowered in the event of a power outage without the need for manual
    hand cranks
  • Durable forklift pockets provide simplistic handling when moving the lift columns from once facility to another
  • Inverted hydraulic cylinders feature an integrated safety valve
    to prevent accidental uncontrolled lowering in the event of oil pressure
    loss
  • Multiple, automatic, independent safety locks spaced every 4 inches ensure safe operation
  • Space-saving design, reduced column weight and a tight turning radius provides improved mobility
  • Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an adjoining bay
  • Durable powder-coat finish
  • Max column capacity: 18,000 lbs. / 8,165 kg
  • Configuration: Sold in sets of 2, 4, or 6 columns
  • Min column height: 97-1/2" / 2,572 mm
  • Max column height: 140-1/2" / 3,708 mm
  • Max lifting height: 71-1/2" / 1,889 mm
  • Length lifting fork: 13.6" / 360 mm
  • Overall length: 47-1/2" / 1,206mm
  • Min width inside lifting fork: 9-1/2" / 241 mm
  • Max width inside lifting fork: 22.7" / 576 mm
  • Overall width: 44" / 1,160mm
  • Turning circle: 40" / 1,016 mm
  • Column weight: 578 lbs. / 262 kg
  • Lifting speed: 85 sec
  • Motor: 208 V 240 V / 50 Hz 60 Hz / 3 Ph
  • Shipping weight: 1,394 lbs. / 634 kg (Ea. post)
Product Not Found

Product Downloads

Additional information

Brands

Reviews

There are no reviews yet.

Be the first to review “BendPak PCL-18HD Portable Column... ”

Your email address will not be published. Required fields are marked *