BendPak HD-9ST


SKU: BEN5175860 Category: Tags: , , , ,


The HD-9ST is your vehicle storage and service solution and the ultimate tool for the DIY'er. Available with casters, drip-trays, jack platform and more.

The space saving design of this lift is ideal for vehicle storage in residential garages or commercial buildings. Also makes a great service lift for shops with minimal floor space. No special foundation is required and installation is simple. Optional casters enable you to roll the lift outside or wherever best suits your needs.

The lift fits in a typical parking space to truly maximize valuable floor space. You can also use the lift for detailing, storage of ATV's, snowmobiles, jet skis, golf carts, boats or anything else that needs to be up off the ground. Utilize the space you now waste above your car even with a standard 8-foot ceiling.

Don't make the mistake of calling this lift a "hobby lift" because it is packed with features that until now were found only on commercial-grade designs. Better yet, it's built and backed by a company with over 40 years in the business. We're proud to have these HD-Series lifts in our lineup because they have one thing in common with our great reputation. Both carry a lot of weight.

Four more models to choose from:
Take your pick of our HD-9 Series lifts; you're currently looking at the HD-9ST, our narrow model. Also view the extra-wide, standard-height HD-9XL, the HD-9 is the standard-width model, the HD-9STX is the narrow-width, tall model, and lastly, the HD-9XW is the extra-wide, tall model.

9,000-pounds lifting capacity
Freestanding design
ETL approved
Runways accommodate wide or narrow vehicles.
Runways include rail kit for optional accessories.
Single hydraulic cylinder mounted underneath runway.
Fully enclosed lifting cables, safety locks, and sheaves.
Internal "anti-sway" slider blocks in each column.
Pneumatic push-button safety release.
Features heavy-duty 3/8" aircraft cable.
Longer approach ramps for low ground clearance vehicles.
Safety locks enclosed in columns minimize pinch points.
Oversized sheave diameter reduces cable fatigue.
Rugged, self-lubricating cable sheaves combined with
1-1/4" sheave axles are fully enclosed minimizing pinch points.
Multi-position safety locks in each column.
Power unit can be located at the front or rear of the lift.
Approach ramps can be removed for added drive-under clearance.
Independent "back-up" slack-cable safety latches.
Optional drive-thru ramps available.
Optional drip trays available.
Optional solid deck increases storage capacity.
Optional 4,500 lb. air/hydraulic rolling jacks available.

Lifting Capacity: 9,000 lbs. / 4082 kg.
Overall width: 99 3/4" / 2635 mm.
Outside length: 174" / 4420 mm.
Overall length: 200" / 5080 mm.
Height of columns: 88" / 2235 mm.
Min. Runway height: 4-1/2" / 114 mm.
Max. Rise: 70" / 1778 mm.
Max. Lifting height: 74-1/2" / 1892 mm.
Width between columns: 89-3/4" / 2280 mm.
Runway width: 19" / 483 mm.
Width between runways: 37-1/4" / 946 mm.
Length of runways: 164" / 4166 mm.
Locking positions: 12
Lock spacing: every 4" / 102 mm.
Lifting time: 45 seconds
Standard motor: 220 VAC / 60 Hz. 1Ph
Shipping Weight: 1,678lbs
Shipping Dimensions: 12'x 2'x 3.5'

Product Not Found

Product Downloads

Additional information



There are no reviews yet.

Be the first to review “BendPak HD-9ST”

Your email address will not be published. Required fields are marked *