Our newest line of XPR-Series 2-Post lifts offers a wide
selection of durable, safe and reliable systems for virtually every
lifting application. Powerful and secure, BendPak's XPR-7TR in
particular greatly increases speed and maintenance repair work on all
popular sizes of turf maintenance equipment, ranging from large fairway
mowers to greens mowers, utility carts, sand groomers, fertilizer
sprayers, golf and refreshment carts. Fully adjustable wheel pan and
fork assemblies fit a wide array of wheel arrangement. The XPR-7TR
provides open access to the gear box, blades, reels and other components
for increased shop efficiency. This two-post is a rugged, close-top
model lift with a 7,000-lb. maximum capacity, and the easy-to-use
dual-synchro equalization system plus user-friendly controls are the
stuff of legends. Need even more versatility out of your lift? Get a
standard swing arm assembly to easily convert your XPR-7TR to a regular
automotive and light truck lift.
All of BendPak's clearfloor model lifts feature dual
"direct-drive" low-pressure cylinders that minimize leakage and reduce
the workload placed on the entire hydraulic system. This exclusive
BendPak design feature saves you maintenance costs throughout the life
of your lift—you aren't going to find friendly sensibility like this
anywhere else. Some more BendPak XPR-Series exclusives include: 16
individual maintenance-free UHMW load bearings, single-piece columns,
extra-tall lifting carriages and oversize 5" cable sheaves. And, to
better cater to your specific lifting needs, we offer similar model
lifts with optional specialty arm configurations. Every XPR-7TR comes with:
Adjustable full-width wheel pan and fork assemblies
Accommodate a huge variety of vehicle wheelbases.
Clearfloor convenience
Our clearfloor models provide unobstructed floor space allowing
technicians to easily move toolboxes, transmission jacks, oil drains and
other equipment underneath the elevated vehicle.
Taller lift carriages
Take a close look at our lift carriages (the lifting assembly that the
arms are attached to) and then take a look at the competition. You'll
notice our 53" tall carriages are considerably taller than most, which
minimizes the stress placed on the load bearings and columns.
Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated,
every XPR-Series lift carriage uses high-tech UHMW (ultra-high
molecular weight polyethylene) load bearings that never need lubrication
and are designed to last the entire life of the lift.
Single-piece columns
We purposely manufacture the columns using single-piece construction for
added strength and less fatigue under heavy load conditions.
Dual direct-drive technology
By utilizing two, low-pressure HVLP direct-drive cylinders, we've
eliminated the need for lifting chains or screw mechanisms most commonly
found on other lift designs. HVLP direct-drive technology offers better
reliability, smoother operation and less maintenance. High-volume,
low-pressure equates to less workload placed on the entire hydraulic
system.
Single-point safety release
The single point safety release and "dead man" style operation controls
makes every one of our XPR-Series lifts easy to operate and safe to use.
On the level
Our dual-synchro equalization system maintains equal lifting and
provides operators with a stable, level vehicle working condition.
Auto shutoff
A rigid, padded safety shutoff bar automatically stops the lift should a
vehicle come in contact with overhead structure.
Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece,
pilot fitted, machined steel piston that is wrapped with specially
designed, pressure loaded U-cup piston seals, backups and wear bands
that virtually eliminate any fluid bypass. The micro-smooth chrome-rod
is machined from high-yield, ground and polished C-1045/50 micro-alloy
steel and plated to a minimum of .001" diametrically, to ensure superior
cylinder operation and life. The superior-design high durometer,
mechanically-loaded rod seals make rod leakage is a thing of the past
while a specially formulated abrasion-resistant urethane rod wiper
provides exclusion protection. The welded cylinder body is made from
robust steel tubing produced to exceed ASTM specifications. This
combination of superb base material and superior processing ensures that
the cylinders remain straight, smooth and last a very long time.
High-speed hydraulics
Free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and
integrated AC power-unit increase ascent and descent speed rates for
enhanced productivity.
Durable powder-coat finish
All XPR-Series lifts feature a durable powder-coat finish that gives the
metal a high-quality, extremely durable finish which can withstand even
the harshest environmental or chemical conditions. Unlike other
companies that claim to powder coat, we take pride in our meticulous
10-step process. First, all parts are visually inspected before being
sandblasted. Afterwards, the parts are washed in our 5-stage phosphate
tanks that can accommodate parts up to 25' long. Once cleaned, they're
immediately dried to avoid rust production, and then outgassed.
Outgassing pre-bakes the parts in a curing oven, reducing the
possibility of blemishes that may be hiding in the pores of the metal.
If not properly outgassed, imperfections in the metal may bubble during
the curing process and most likely will cause chips in the powder. After
the parts are washed and outgassed, any surfaces and / or threaded
holes that need to be masked or plugged, are done so with
high-temperature masking tape and silicone plugs. Next, the parts are
given a quick thinner wipe to remove any light debris or fingerprints,
before being hung on an electrostatically grounded conveyor line. The
powder is finally applied using an electrostatic spray gun. The powder
"sticks" to the surface in a fashion similar to how dust sticks to a
television screen. Once the parts are powder coated, the carts are
rolled into our curing oven and baked at 400° F for 45 minutes.
Detailed instructions
Included with every lift are detailed installation and maintenance
instructions, graphic safety decals, maintenance decals, vehicle lifting
point guide and a safety instruction placard to train personnel on
proper safety procedures and maintenance guidelines. |
